Polymeric Heavy Organic Sludge Decontamination in a Sulfolane Unit

Results Achieved

Heat exchangers decontaminated of heavy organic polymeric sludge to restore operational performance

33% reduction of allocated outage time

Saved hundreds of thousands of dollars in mechanical cleaning costs and associated outage time

Chemical profiles

FQE Solvent-PR is used for dissolution of many polymers common to the petroleum refining and petrochemical industries

Polymeric Heavy Organic Sludge Decontamination in a Sulfolane Unit

In November 2017, a major American refiner located in Corpus Christi, Texas sought out a solution to dissolve heavy organic sludge containing polymerized material in a sulfolane unit.

During operation, the degradation of sulfolane produced a foulant consisting of heavy organic material and polymer.

 

Due to conditions at the plant the project needed to be completed within a short timeframe. To avoid any major economic setbacks, the refinery had to meet the following stringent conditions:

 

  1. To utilize a product that could successfully dissolve the deposits
  2. To meet a narrow window of 6 hours to fully clean a set of copper heat exchangers

 

Since other competitive products could not meet these criteria, FQE Chemicals was tasked with developing a new solvent product. The result was the development of FQE Solvent PR+. During the application, it was dispersed in a hydrocarbon cutter stock and heated to a temperature of 160-180°F (70-82°C). The material was circulated through the sulfolane unit until all the heavy organics and polymeric materials were fluidized. The project was deemed completed in 4 hours, thereby providing a 33 percent reduction of the allotted timeframe.

Download a PDF copy of this case history

Contact us to speak to one of our experts

Request More Information